Quick Cable Suspension System

Quick to ship, quick to install... This Cable Suspension System makes it quick and easy!


Ceiling Anchor	Floor Anchor

QuickCable Assembly; Floor to Ceiling Anchor with 10 meter (32'-8") Cable included.
You just cut the 1.6 mm Stainless Steel Cable to the desired length on site!

This anchor assembly is used for all cable supports from a ceiling to floor installation.
The mounting plate is unscrewed from the barrel and is securely anchored to the ceiling and floor. You will need to provide the screws used to install the mounting plates. Then the cable is dropped through the hole in the top barrel and the barrel is screwed on to the mounting plate. (There is a permanent crimp on one the end of the cable.) The bottom of the cable is fed through the bottom barrel and slips out the hole on the lower side, then excess cable is cut off.

Stock Number	Description	Price Each 1-11 pc	Price Each 12-29 pc	Price Each 30+ pc
ACDS	Floor to Ceiling Anchors with 10 meter Stainless Steel Cable, Satin Anodized Silver	$20.00	$19.00	$18.00


Ceiling Anchor	Floor Anchor

QuickCable Assembly; Wall to Wall Anchor with 10 meter (32'-8") Cable included.
You just cut the 1.6 mm Stainless Steel Cable to the desired length on site!

This anchor assembly is used for signage only attached to a wall.
But can also be used to suspend shelves from an arched or peaked ceiling.
Same installation process as described above.

Stock Number	Description	Price Each 1-11 pc	Price Each 12-29 pc	Price Each 30+ pc
ACDSW	Wall to Wall Anchors with 10 meter Stainless Steel Cable, Satin Anodized Silver	$33.00	$32.00	$30.00


Single Vertical Panel Support	Double Vertical Panel Support

Vertical Panel Supports
These are used for supporting signage or a decorative panel from 3/32" to 1/4", or 2mm to 6mm thick.
Please use tempered glass or other shatter-proof material.

Just place the support as desired on the cable and lock in place with the set screw provided.
Another set screw is provided to hold the panel in place.

Stock Number	Description	Price Each 1-11 pc	Price Each 12-29 pc	Price Each 30+ pc
AC-VPC	Single Vertical Panel Support, Satin Anodized Silver	$3.00	$2.85	$2.70
AC-DVPC	Double Vertical Panel Support, Satin Anodized Silver	$4.00	$3.85	$3.70


Single Shelf Support	Double Shelf Support

Horizontal Shelf Supports
These are used for supporting shelving up to 1/4" or 6mm thick.
Please use tempered glass or other shatter-proof material.

Just place the support as desired on the cable and lock in place with the set screw provided.
Another set screw is provided to hold the shelf in place.

Stock Number	Description	Price Each 1-11 pc	Price Each 12-29 pc	Price Each 30+ pc
AC-HSC	Single Shelf Support, Satin Anodized Silver	$3.00	$2.85	$2.70
AC-DHSC	Double Shelf Support, Satin Anodized Silver	$4.00	$3.85	$3.70


All Purpose Drilled Support

All Purpose Drilled Support
Use these to support a shelf, hang rail or anything else with a 13/32" or 10mm diameter hole in it.

Just place the support as desired on the cable and lock in place with the set screw provided.
If your shelf has a saw cut from the edge of the material to the hole you can install the shelf after the supports are in place. But if you don't have a saw cut to the hole you need to feed the cables through the holes before placing the cable in the bottom anchor!

Stock Number	Description	Price Each 1-11 pc	Price Each 12-29 pc	Price Each 30+ pc
AC-HSS	Drilled Support, Satin Anodized Silver	$2.00	$1.85	$1.70

If you can't find what you need on this page, check out our more extensive Cable System page. But please keep in mind that you cannot combine parts from the two different lines!

QuickCable Suspension System

With shipping locations on both the East and West Coast
4120 Douglas Blvd., Suite 306-315
Granite Bay, CA 95746-6301
CONTACT INFORMATION: Phone (916) 797-1030 Fax (916) 797-1040 E-mail sales@fixturepronto.com

	FixturePronto now offers... The *QuickCable* Suspension System An affordable cable system that simplifies the display process. We provide the cable anchors, cable and panel supports. You provide your own shelves, signs, hang rails or other components needed to suspend your products. Each cable is rated to support up to 95 lbs. So four cables can hold up to 380 lbs. total. Each panel support is rated at 20 lbs., so that means a shelf supported by four supports can hold up to 80 lbs. total Weight Capacity is based on the cable strength only. You need to properly secure to an equally supportive structure!

QuickCable Suspension System

With shipping locations on both the East and West Coast 4120 Douglas Blvd., Suite 306-315 Granite Bay, CA 95746-6301 CONTACT INFORMATION: Phone (916) 797-1030 Fax (916) 797-1040 E-mail sales@fixturepronto.com

With shipping locations on both the East and West Coast
4120 Douglas Blvd., Suite 306-315
Granite Bay, CA 95746-6301
CONTACT INFORMATION: Phone (916) 797-1030 Fax (916) 797-1040 E-mail sales@fixturepronto.com