"Pronto" Links→ HOME TABLE OF CONTENTS WHAT'S NEW ORDER FORM

STAND-OFF SIGN HOLDERS

A most simple but effective method of mounting signage to the wall is by using our Stand-Off Sign Holders.

STAND-OFF SIGN HOLDERS

These affordable Stand-Off Sign Holders are offered in many different sizes to fit most any project. 
Good for both indoor and outdoor applications.

FixturePronto offers three different Stand Off Sign Holder lines.
Select Stand-Offs - Lots of options at an affordable price.
Brushed Stainless Steel Stand-Offs - A heavy-duty solid steel barrel when weight capacity is an issue.
Satin Aluminum Stand-Offs - Simple design with simple installation.

So which line is best for me?
If you need a quick and simple solution...
                           Satin Aluminum Stand-Offs (bottom of this page).
If you plan on installing a very heavy sign and need to have it stand several inches away from the wall...
                                         Brushed Stainless Steel Stand-Offs (middle of this page).
If you have the patience to select all the various parts and want to save some money...
Select Stand-Offs (directly below)

 

Signage requirements for Select Stand-Offs:
All Select Stand-Offs require a 1/4" diameter hole in the signage.
15mm Stand-Offs allow a maximum 1/4" overall signage thickness.
20mm Stand-Offs allow a maximum 5/16" overall signage thickness.
25mm Stand-Offs allow a maximum 1/2" overall signage thickness.
   
Concealed Anchor  15mm Barrel with Flat Cap
   
Flat Anchor  20mm Barrel with Slotted Cap
 (Slotted top cap discontinued)
   
Beveled Anchor  25mm Barrel with Dome Cap 
SELECT STAND-OFFS 
Satin Aluminum Mill Finish Stand-Offs, Top Caps and Wall Anchors (except for Brass Concealed Anchor as shown).
You can select from 13 different Barrels sizes, each with three different Top Caps and Wall Anchors to choose from.
That means the ordering process is a bit more complicated, but you have more options and discounted prices for larger quantities!
You'll need to be sure to order the same number of each of the three components, Barrel, Top Cap and Wall Anchor.
You will still need to provide your own screw to attach the Wall Anchor to the wall. Any #6 Countersunk Head Screw will work.

SELECT STAND-OFF BARRELS 

Stock Number 

Description (Diameter x Length)
Price each
1-9 ordered 
Price each
10-24 ordered 
Price each
25-49 ordered 
Price each
50+ ordered 
ATC-15201 15mm x 20mm Select Stand-Off  Barrel (19/32" x 25/32") $2.25 $2.10 $2.00 $1.90
ATC-15251 15mm x 25mm Select Stand-Off  Barrel (19/32" x 63/64") $2.65 $2.50 $2.40 $2.30
ATC-15321 15mm x 32mm Select Stand-Off  Barrel (19/32" x 1-17/64") $2.80 $2.70 $2.60 $2.50
ATC-15381 15mm x 38mm Select Stand-Off  Barrel (19/32" x 1-1/2") $3.35 $3.20 $3.10 $3.00
ATC-20201 20mm x 20mm Select Stand-Off  Barrel (25/32" x 25/32") $2.60 $2.45 $2.35 $2.25
ATC-20251 20mm x 25mm Select Stand-Off  Barrel (25/32" x 63/64") $2.80 $2.65 $2.55 $2.45
ATC-20321 20mm x 32mm Select Stand-Off  Barrel (25/32" x 1-17/64") $3.00 $2.85 $2.75 $2.65
ATC-20381 20mm x 38mm Select Stand-Off  Barrel (25/32" x 1-1/2") $3.75 $3.60 $3.50 $3.40
ATC-25201 25mm x 20mm Select Stand-Off  Barrel (63/64" x 25/32") $3.00 $2.85 $2.75 $2.65
ATC-25251 25mm x 25mm Select Stand-Off  Barrel (63/64" x 63/64") $3.50 $3.35 $3.25 $3.15
ATC-25321 25mm x 32mm Select Stand-Off  Barrel (63/64" x 1-17/64") $4.25 $4.10 $4.00 $3.90
ATC-25381 25mm x 38mm Select Stand-Off  Barrel (63/64" x 1-1/2") $5.20 $5.00 $4.90 $4.80
ATC-25761 25mm x 76mm Select Stand-Off  Barrel (63/64" x 3") $7.25 $7.10 $7.00 $6.90
           
(You can combine any quantities of the above to receive the discounted prices, but Top Caps and Wall Anchors are not included for discount pricing.)

SELECT STAND-OFF TOP CAPS

Stock Number 

Description
Price each
1-9 ordered 
Price each
10-24 ordered 
Price each
25-49 ordered 
Price each
50+ ordered 
ASC-15161 15mm Flat Top Cap $1.00 $0.95 $0.90 $0.85
ASC-15163 15mm Dome Top Cap $1.00 $0.95 $0.90 $0.85
ASC-20161 20mm Flat Top Cap $1.25 $1.20 $1.15 $1.10
ASC-20163 20mm Dome Top Cap $1.25 $1.20 $1.15 $1.10
ASC-25201 25mm Flat Top Cap $1.75 $1.70 $1.65 $1.60
ASC-25203 25mm Dome Top Cap $1.75 $1.70 $1.65 $1.60
(Please use the same column pricing based on the number of Barrels ordered above.)

SELECT STAND-OFF WALL ANCHORS

Stock Number 

Description
Price each
1-9 ordered 
Price each
10-24 ordered 
Price each
25-49 ordered 
Price each
50+ ordered 
BCA-22121 Concealed Anchor (For all 3 diameter Barrels) $0.75 $0.70 $0.65 $0.60
ACA-22122 Flat Anchor 20mm dia. Base (For 15 and 20mm diameter Barrels) $1.50 $1.45 $1.40 $1.35
ACA-22123 Flat Anchor 25mm dia. Base (For all 3 diameter Barrels) $1.55 $1.50 $1.45 $1.40
ACA-22124 Beveled Anchor 30mm Base (For all 3 diameter Barrels) $2.25 $2.15 $2.10 $2.05
ACA-22126 Beveled Anchor 35mm Base (For all 3 diameter Barrels) $3.15 $3.05 $3.00 $2.95
(Please use the same column pricing based on the number of Barrels ordered above.)

Wall Anchors Edge Grip Stand-offs         
EDGE GRIP STAND-OFFS 
This popular sign holder provides one of the most tamper-proof methods of mounting a sign.
The mounting set-screw is located inside the barrel and is concealed once the Edge Grip Stand-off is mounted to the Wall Anchor.
Satin Aluminum Mill Finish Edge Grip Stand-Offs and Wall Anchors.
Choose from 2 diameter with various stand-off distances depending on your sign thickness.
You'll need to be sure to order the same number of each of the two components, Edge Grips and Wall Anchors.  When the Concealed Anchor is used only the barrel is visible, as shown to the right.
The other Wall Anchors will be visible as shown to the left.
You will still need to provide your own screw to attach the Wall Anchor to the wall. Any #6 Countersunk Head Screw will work. Allen Wrench is included to lock the Edge Grip barrel to the Wall Anchor.
Click Here for the Edge Grip Installation Guide
EDGE GRIP STAND-OFFS

Stock Number 

Description
Price each
1-9 ordered 
Price each
10-24 ordered 
Price each
25-49 ordered 
Price each
50+ ordered 
ATCS-25383 25mm x 38mm Edge Grip Barrel (1" x 1-1/2") with 13mm (1/2") opening $5.40 $5.25 $5.15 $5.00
ATCS-25382 25mm x 38mm Edge Grip Barrel (1" x 1-1/2") with 8.5mm (5/16") opening $5.40 $5.25 $5.15 $5.00
ATCS-20321 20mm x 32mm Edge Grip Barrel (3/4" x 1-1/4") with 6.5mm (1/4") opening $4.60 $4.45 $4.35 $4.25
ATCS-20251 20mm x 25mm Edge Grip Barrel (3/4" x 1") with 6.5mm (1/4") opening $4.30 $4.15 $4.05 $3.95
(You can combine any quantities of the above to receive the discounted prices, but Wall Anchors are not included for discount pricing.)
EDGE GRIP WALL ANCHORS

Stock Number 

Description
Price each
1-9 ordered 
Price each
10-24 ordered 
Price each
25-49 ordered 
Price each
50+ ordered 
ACA-22626 Beveled Anchor 30mm Base (For 25mm diameter Edge Grips) $3.50 $3.40 $3.30 $3.20
ACA-22624 Beveled Anchor 25mm Base (For 20mm diameter Edge Grips) $2.55 $2.45 $2.35 $2.25
ACA-22623 Flat Anchor 25mm dia. Base (For 25mm and 20mm diameter Edge Grips) $1.75 $1.65 $1.55 $1.45
ACA-22622 Flat Anchor 20mm dia. Base (For 20mm diameter Edge Grips) $1.70 $1.60 $1.50 $1.40
ACA-22621 Concealed Anchor (For 25mm and 20mm diameter Edge Grips) $0.75 $0.70 $0.65 $0.60
(Please use the same column pricing based on the number of Edge Grips ordered above.)
Wall Anchors Projection Stand-offs          
Projection Stand-Offs
Can also be used as a shelf support system!
Satin Aluminum Mill Finish Projection Stand-Offs and Wall Anchors.
Two types to choose from: Direct Wall Mount (No anchor needed) or Removable.
The Direct Mount has a screw hole in the center and you attach to the wall first, then slide in your sign and secure in place with the allen-head screw provided. The Removable Mount requires a Wall Anchor to be attached to the wall. 
More visibility and greater support is provided by a Wall Anchor.
You'll need to be sure to order the same number of each of the two components.
 When the Concealed Anchor is used only the barrel is visible, as shown to the right.
The other Wall Anchors will be visible as shown to the left.
You will still need to provide your own screw to attach the Wall Anchor to the wall. Any #6 Countersunk Head Screw will work. Allen Wrench is included to lock the Projection Stand-off to the Wall Anchor.
PROJECTION STAND-OFFS

Stock Number 

Description
Price each
1-9 ordered 
Price each
10-24 ordered 
Price each
25-49 ordered 
Price each
50+ ordered 
ATCM-20451 20mm x 45mm Removable Barrel (3/4" x 1-3/4") with 6.5mm (1/4") opening $4.90 $4.80 $4.70 $4.60
ATCM-20351 20mm x 35mm Removable Barrel (3/4" x 1-3/8") with 6.5mm (1/4") opening $4.25 $4.15 $4.10 $3.95
ATCM-20255 20mm x 25mm Direct Mount Barrel (3/4" x 1") with 8.5mm (5/16") opening $3.60 $3.50 $3.40 $3.30
ATCM-20251 20mm x 25mm Direct Mount Barrel (3/4" x 1") with 6.5mm (1/4") opening $3.60 $3.50 $3.40 $3.30
Direct Mount Projection Stand-offs do not use Wall Anchors. They attach directly to the wall.
(You can combine any quantities of the above to receive the discounted prices, but Wall Anchors are not included for discount pricing.)
PROJECTION STAND-OFF WALL ANCHORS

Stock Number 

Description
Price each
1-9 ordered 
Price each
10-24 ordered 
Price each
25-49 ordered 
Price each
50+ ordered 
ACA-22626 Beveled Anchor 30mm Base (For 25mm diameter Edge Grips) $3.50 $3.40 $3.30 $3.20
ACA-22624 Beveled Anchor 25mm Base (For 20mm diameter Edge Grips) $2.55 $2.45 $2.35 $2.25
ACA-22625 Flat Anchor 30mm dia. Base (For 25mm and 20mm diameter Edge Grips) $3.15 $3.05 $2.95 $2.85
ACA-22623 Flat Anchor 25mm dia. Base (For 25mm and 20mm diameter Edge Grips) $1.75 $1.65 $1.55 $1.45
ACA-22622 Flat Anchor 20mm dia. Base (For 20mm diameter Edge Grips) $1.70 $1.60 $1.50 $1.40
ACA-22621 Concealed Anchor (For 25mm and 20mm diameter Edge Grips) $0.75 $0.70 $0.65 $0.60
(Please use the same column pricing based on the number of Edge Grips ordered above.)
 
Flush Cap Sign Holders
For simply mounting a sign directly to the wall.
  Satin Aluminum Mill Finish Flush Cap Sign Holders with Brass Concealed Anchor.
Three diameters to choose from.  Each will cover the Brass Concealed Anchor that holds your sign to the wall.
You will still need to provide your own screw to attach the Concealed Anchor to the signage.
Any #6 Countersunk Head Screw will work.
FLUSH CAP SIGN HOLDERS

Stock Number 

Description
Price each
1-9 ordered 
Price each
10-24 ordered 
Price each
25-49 ordered 
Price each
50+ ordered 
ASB-25121 25mm x 12mm Flush Cap Sign Holder (1" x 1/2") $1.50 $1.45 $1.40 $1.35
ASB-20101 20mm x 10mm Flush Cap Sign Holder (3/4" x 3/8") $1.40 $1.35 $1.30 $1.25
ASB-15091 15mm x 10mm Flush Cap Sign Holder (5/8" x 3/8") $1.30 $1.25 $1.20 $1.15
BCA-22121 Brass Concealed Anchor $0.75 $0.70 $0.65 $0.60
Please be sure to order a Concealed Anchor for each Flush Cap ordered.
(You can combine any quantities of the above to receive the discounted prices, but Concealed Anchors are not included for discount pricing.)
Signage requirements for Brushed Stainless Steel Stand-Offs:
For signage material from 1/8" to 1/2" thick overall.
5/8" diameter Stand-Off;    1/4" diameter holes needed.
3/4" diameter Stand-Off;  5/16" diameter holes needed.
1"    diameter Stand-Off;  5/16" diameter holes needed.
Wall Mount Screw Anchor for Mounting Screw
Screw Anchor

BRUSHED STAINLESS STEEL STAND-OFF SIGN HOLDERS
Each Brushed Stainless Steel Stand-Off includes a 1-1/4" Long Wood-Type Screw and
Nylon Screw Anchor for mounting to the wall.  Works great for most types of wall materials. 
You might also need to provide some type of hollow wall anchor if mounting large, heavy signage to hollow drywall.

The top caps unscrew from the base letting you easily and quick change out the signage as needed. 
(Price includes wall-mount wood screw and anchor)

Stock Number

Description

Price each
900-16-0100 5/8" diameter x 1" long Stand-off $8.85
900-16-0200 5/8" diameter x 2" long Stand-off $10.10
900-16-0300 5/8" diameter x 3" long Stand-off $10.60
900-20-0100 3/4" diameter x 1" long Stand-off $9.60
900-20-0200 3/4" diameter x 2" long Stand-off $10.60
900-20-0300 3/4" diameter x 3" long Stand-off $11.60
900-25-0100 1" diameter x 1" long Stand-off $10.35
900-25-0200 1" diameter x 2" long Stand-off $11.60
900-25-0300 1" diameter x 3" long Stand-off $13.20
     
900-10Z-11L Screw and Anchor for 900 Series Stand-off Included
Signage requirements for Satin Aluminum Stand-Offs:
For signage material from 1/8" to 1/2" thick overall.
5/16" diameter holes needed.
SATIN ALUMINUM STAND-OFF SIGN HOLDERS
A simple solution for all kinds of wall materials.  You can use your own hardware or purchase from those shown below.

The top caps unscrew from the base letting you easily and quick change out the signage as needed. 
(Mounting hardware sold separately per below)

Stock Number

Description

Price each
900A-25--0100 1" diameter x 1" long Stand-off $8.50
900A-25-0200 1" diameter x 2" long Stand-off $9.25
900-05-01 #6 Screw-In Anchor & Screw Kit $0.45
900-05-02 1/8" Toggle & 6-32 x 2.5" Screw Kit $0.45
900-05-03 #6 x 2.5" Wood Screw $0.15
900-05-04 6-32 x 2.5" Screw w/ nut and washer kit $0.45

For More Information CLICK HERE.

Please CLICK HERE to Return to Literature and Signage Table of Contents.

 
"Pronto" Links→ HOME TABLE OF CONTENTS WHAT'S NEW ORDER FORM

With shipping locations on both the East and West Coast
5098 Foothills Blvd., Suite 3-312
Roseville, CA 95747
CONTACT INFORMATION: Phone (916) 797-1030     Fax (916) 797-1040  E-mail sales@fixturepronto.com

Click Here For
On-Line Order Form

fraud_072799flip_a.gif (4173 bytes)

We Accept
Visa, MasterCard
,
American Express

Privacy Policy                       Facebook                      Return Policy

Copyright © 2014 
FixturePronto®. All rights reserved.