FLOOR TO CEILING ANCHORS AND ROD |
Illustration |
Stock Number |
Description |
Price Each* |
|
Technical
Specifications |
 |
61210 |
Complete Set
composed of Top and Bottom Anchor Assemblies |
$28.50 |
|
Top anchor is 18mm high and 18mm in
diameter.
Inner mounting grommet has a 3/16" diameter hole for mounting.
Bottom anchor is 34mm high overall and includes locking set-collar
and spring tensioner for on-site assembly.
Rods are 6mm diameter stainless steel.
Maximum recommended load is 150 lbs per rod. |
61390 |
Top Anchor
only. (For use if not connected to the floor). |
$11.25 |
|
62150 |
1.5 meter
Rod (59") Male thread at top, female at bottom. |
$28.00 |
|
62100 |
1.0 meter
Rod (39") Male thread at top, female at bottom. |
$26.00 |
|
Combine 1.5
meter, 1.0 meter and .5 meter rods
to reach or exceed desired overall length.
Cut off excess at bottom on site. |
62050 |
.5 meter Rod
(19.5") Male thread at top, rounded bottom. |
$19.00 |
|
|
41930 |
(Optional)
Trim Plate for Bottom Anchor |
$9.50 |
|
|
 |
|
|
|
|
|
94219 |
Aluminum
Channel for movable cable, 1 meter (3'-3") |
$20.00 |
|
Channel must be secured to stable blocking no less than 16"
on-center. Order one 41950 for each cable to channel
connection point. |
94218 |
Aluminum
Channel for movable cable, 1.5 meter (4'-11") |
$29.00 |
41950 |
Biscuit and
Screw to attach anchor to channel |
$2.50 |
|
All above parts are offered in Satin Silver only, except the Rods
which are Polished Stainless Steel. |
|
CEILING PANEL SUPPORT AND ANCHOR |
Illustration |
Stock Number |
Description |
Price Each* |
|
Technical
Specifications |
 |
61230 |
Panel
Suspension Assembly.
Complete Set composed of Top Anchor and Panel Support for up to 3/8"
thick. Rods sold separately. |
$29.00 |
|
Top anchor is 18mm high and 18mm in
diameter.
Inner mounting grommet has a 3/16" diameter hole for mounting.
Maximum recommended load is 10 lbs per unit. |
|
All above parts are offered in Satin Silver only. |
|
 |
 |
61900
61917 |
Single Support for shelf
up to 1/4" thick, long screw
Single Support for shelf 3/8" thick, short screw |
$15.50
$15.50 |
|
18mm diameter.
Jaw depth 11mm. Rod is 5/8" from edge of material. Maximum load is 25
lbs.
Order short set-screw for material 3/8" thick.
Order long set-screw for material 1/4" or less thick. |
61920
61927 |
Double Support for shelf
up to 1/4" thick, long screw
Double Support for shelf 3/8" thick, short screw |
$26.00
$26.00 |
|
|
 |
 |
61912 |
Single Support for
vertical panel up to 3/8" thick |
$16.50 |
|
18mm diameter.
Jaw depth 11mm. Rod is 1/2" from edge of material. Maximum load is 25
lbs. |
61922 |
Double Support for
vertical panel up to 3/8" thick |
$28.00 |
|
|
 |
 |
61955 |
Single Support for shelf
or panel of any thickness |
$18.00 |
|
18mm diameter.
Rod is 1/2" from edge. 25 lbs.
Use hole in bottom to screw shelf to support. |
61956 |
Double Support for shelf
or panel of any thickness |
$28.00 |
|
|
 |
|
61000 |
Support for Drilled Shelf |
$7.50 |
|
16mm overall
diameter. Neck is 8mm diameter and 10mm high. Requires 3/8"
hole. Max. load 25 lbs. |
|
|
|
|
|
 |
 |
61821 |
Single Cover Clamp Support
with T10 Stud |
$16.45 |
|
18mm diameter.
Insert diameter 10mm. Rod is 3/4" from edge of material. Maximum load
is 25 lbs. |
61921 |
Double Cover Clamp Support
with two T10 Studs |
$28.90 |
|
|
 |
 |
61600 |
Single Vertical Drilled
Panel Support with cover cap |
$15.00 |
|
18mm diameter.
For max. 3/16" thick panel.
Rod is 9mm from panel. Maximum load is 20 lbs. |
61602 |
Double Vertical Drilled
Panel Support with cover caps |
$20.000 |
|
|
 |
 |
61940 |
Single Hook Support |
$16.50 |
|
18mm diameter.
Maximum load is 20 lbs. |
61942 |
Double Hook Support |
$27.00 |
|
|
 |
|
11027 |
Wall Mount Support for
shelf up to 3/8" thick |
$15.00 |
|
18mm diameter.
Jaw depth 11mm. Wall is 1" from edge of material. 36mm overall. Max.
load is 25 lbs. |
|
(To match 61900, 61917,
61920 and 61927 above) |
|
|
|
 |
|
11028 |
Wall Mount Vertical Panel
Support up to 3/8" thick |
$17.50 |
|
18mm diameter.
Jaw depth 11mm. Wall is 1" from edge of material. 39mm overall. Max.
load is 25 lbs. |
|
(To match 61912 and 61922
above) |
|
|
|
 |
|
11019 |
Wall Mount Vertical
Drilled Panel Support up to 3/16" th. |
$14.25 |
|
18mm diameter.
Wall is 3/4" from edge of panel. 18mm overall. Max. load is 20 lbs. |
|
(To match 61600 and 61602
above) |
|
|
|
 |
|
11020 |
Wall Mount Shelf or Panel
Support for any thickness |
$21.00 |
|
18mm diameter.
Wall is 1" from edge of material. 45mm overall. Max. load is 25 lbs. |
|
(To match 61955 and 61956
above) |
|
|
|
Please note: Each
order ships with complete installation instructions and necessary wrenches
to tighten and adjust all fittings. Tempered glass is recommended to
be used on all applications with glass shelves or panels. Please
contact FixturePronto
with any specific questions. |